Details

---

Brand	Sherwood
Chamfer	Plug Second Taper
Die Hex Width	1.01 1.10 1.30 1.48in.
Die Type	Hex Die Nut Round Die
ean	5036140185272
eclassCode	21010210
Includes	(2) Bar Type Tap Wrenches: 1/4”-3/4”, 1/16” - 1/4” (3) HSS Dies: 1/4”-20, 5/16”-18, 3/8”-16 (4) HSS Die Nuts: 7/16”-14, 1/2”-13, 5/8”-11, 3/4”-10 (4) Straight Flute Taper Plug: #10-24, 1/4”-20, 5/16”-18, 3/8”-16 (4) Straight Flute Taper Second: 7/16''-14, 1/2''-13, 5/8''-11, 3/4''-10 (4) Straight Flute Taper Taps: #10-24, 1/4”-20, 5/16”-18, 3/8”-16 (6) HSS Jobber Drills: 3.90mm, 5.10mm, 6.60mm, 8.00mm, 9.40mm, 10.80mm Carrying Case Die Stock: 1” O/D
Kit Type	Tap, Die & Drill
Largest Thread Size	3/4''
Number of Dies	7
Number of Pieces	28
Number of Taps	12
Smallest Thread Size	#10
Tap Dimensions Standard	BS1127 BS 328/DIN 338N DIN 1814 DIN 225 ISO 529
Tap Finish/Coating	Uncoated
Tap Material	High Speed Steel
Tap Type	Straight Flute
Tap Wrench Type	Straight-handle Bar
Thread Direction	Right Hand
Thread Size Range	#10 to 3/4
Thread Standard	UNC

UNC Threading Set No.10 - 3/4” UNC:
HSSGT Straight Flute Taps
Taper: No. 10 x 24, 1/4” x 20, 5/16” x 18, 3/8” x 16.
Second: 7/16” x 14, 1/2” x 13, 5/8” x 11, 3/4” x 10.
Plug: No. 10 x 24, 1/4” x 20, 5/16” x 18, 3/8” x 16.
Bar Type Tap Wrenches: 1/16” - 1/4” and 1/4” - 3/4”.
Tapping Drills to suit: HSS S/S. 3.90, 5.10, 6.60, 8.00, 9.40, 10.80mm
HSS 1” O/D Dies: 1/4” x 20, 5/16” x 18, 3/8” x 16.
Diestock: 1” O/D.
HSS Die Nuts: 7/16” x 14, 1/2” x 13, 5/8” x 11, 3/4” x 10.