Details

---

	Metric	Imperial
Model	CP7748TL-2
Part number	8941077485
Actual air consumption	10 l/s	22 cfm
Air inlet thread size	1/4 ''
Average air consumption	2 1/2 l/s	5 1/2 cfm
Blows per minute	850
Box dimensions	264*192*75 mm	10.4*7.6*3 ''
Clutch type	Twin Hammer
European Standards	EN ISO 11148-6:2013
Free speed	8200 rpm
Handle type	Pistol
Length	250 mm	9.8 ''
Maximum Torque (reverse)	1250 Nm	920 ft.lbs
Min. hose size	10 mm	3/8 ''
Net weight	2.4 kg	5.3 lb
Over carton	406*282*403 mm	16*11.1*15.9 ''
Power/weight ratio	520.8 Nm/kg	174 ft.lb/lb
Side to center	38 mm	1 1/2 ''
Socket retainer	Friction ring
Sound Power	97 db(A)
Sound pressure	86 db(A)
Square drive	1/2 ''
Vibration	4.8 m/s²
Vibration ISO	ISO-28927-2
Vibration uncertainty (K)	1 1/2 m/s²
Working Torque Range (fwd)	90 - 140 Nm	66 - 103 ft.lbs

Benefits

• Torque limited in forward: 60/70 ft. Lbs. - 90/100 Nm
• Full power in reverse
• One Hand Operation: 2 power setting positions
• Insulation & Comfort: Contoured comfort grip handle instead of TPR injected in handle
• Low sound level
• Suited for all light vehicle tire changing applications

Features

• 1/2'' composite impact wrench with friction ring socket retainer
• 2 setting positions : one in Reverse and one Torque Limited in forward
• 60/70 ft. lbs. - 90/100 Nm in torque limited position in forward
• 920 ft.lbs - 1,250Nm of maximum torque in reverse
• Aluminum clutch & rear housings
• Thermo-plastic rubber injected in housing
• Resistant to most chemicals used in workshops
• Universal & durable twin hammer mechanism
• Full teasing trigger
• 360° swivel air inlet
• The CP7748TL series is intended to be used as a “snugging” tool prior to final tightening with a calibrated torque wrench to reach the car manufacturer’s specified torque rating for wheel assembly.
• Torque results vary greatly depending on the type of wheel, air pressure, run time and many other factors.