Details
Air Supply Required | 50 PSI @ 7 CFM |
Voltage | 115 or 230 Volt |
Warranty* | 2 Years |
Current | 30 Amps 115 Volt/20 Amps 230 Volt |
Output Current, amps | 5–25 |
Depth, inches (mm) | 16 (406) |
Width, inches (mm) | 8 (203) |
Country Of Origin | ITA |
Sever Thickness, inches | 1/2 |
Primary Input, volts | 115 or 230 V AC, 50/60 Hz |
Ground Cable Length, feet (m) | 12 (3.7) |
Cut Thickness, inches | 3/8 |
Height, inches (mm) | 16 (406) |
Net Weight, lb (kg) | 29 (13) |
Power Input Cable Length, feet (m) | 8 (2.4) |
Output Control | Adjustable 5–25 Amps |
Shipping Weight, lb (kg) | 33 (14.96) |
Phase | Single Phase |
Primary Input, amps | 30 A 115 V or 20 A 230 V |
Torch Cable Length, feet (m) | 12 (3.7) |
Duty Cycle Rating | 100% @ 19 A |
Frequency | 50/60 Hz |
Features
- Inverter technology features a small-yet-powerful package size that allows for portability in a variety of situations in the shop or on the jobsite
- Ideal for cutting a variety of ferrous, non-ferrous and high-strength materials
- Cuts a maximum of 3/8'' and will sever up to 1/2''
- Adjustable amperage range—from 5-25 A—provides the ability to minimize distortion on thinner materials
- Depth-of-cut adjustability—for applications such as panel removal around spot welds—adjusts cut depth to the top layer of material without disturbing the base layer
- Material capability ideal for cutting a variety of ferrous, non-ferrous and high-strength material
- Pilot self-restart function provides the ability to cut perforated, grid or expanded metal applications
- Air supply system contains an air filter and pressure regulator to allow for either a compressed air or nitrogen air supply
- Protection LED warning system for low air pressure, high temperatures and system blockages
- Input voltage versatility automatically accepts 115 or 230 V input power supply voltages at minimum current requirements
- Ideal for automotive repair, collision repair, heavy-duty truck, farm and metal fabrication shops
- Comes complete with a power supply, torch assembly, ground cable and spare torch consumables
- Technical support and service: 800-ABC-WELD
View more about SNAP-ON Plasma Cutter / Model: PLASMA30i on main site