Details

---

Pin Output Sockets	16 outputs x 1.0 mm diameter with LED lamp indications
Operating Temperature	32–122 °F (0–50 °C)
Volt Displays	3 Digit LED?  0.1 V Resolution
Country Of Origin	CHN
Permitted Humidity	< 70%
Protocols Detected	PWM (J1850), VPW (J1850), ISO 9141-2, DIS/ISO 14230-4, Canbus (J-2284)
OBD Cable Length, inches (mm)	30 (762)
Protection	Overload - PTC fuse (Self-healing), Reverse Polarity protection
Operating Voltage	Input: 7.0–30.0 V DC
Maximum Load	3.0 Amps Output

Features

• Test the vehicle diagnostic link connector DLC for abnormalities such as shorting or reverse polarity at the pins
• Provides quick access to all 16 pin terminals during vehicle diagnosis and repair, eliminates guessing which terminals are being probed
• Displays live Voltage readings when testing pins
• Convenient DLC light illuminates the DLC connector to aid in locating the vehicle’s OBD-II port
• Once plugged into the vehicle’s OBD-II port, the unit will check the pins for present voltage—respective LEDs will illuminate with specific colors, pulse or be solid, to identify communication or error (See user manual for details)
• Default pin display is set to pin 16 with corresponding actual battery voltage detected from the DLC
• No need to crawl under the dash, attempting to probe what you can’t see
• Compatible with 12 V systems
• Use independently or diagnose further with a customer owned multi-meter and the positive and negative pin adaptors included
• Works in-line with the vehicle’s DLC and scan tool (sold separately)
• Monitors vehicle voltage during module programming with a low voltage alarm
• Eliminates damage to vehicle terminals from probing