Details

---

 

Code	Ideal For	Approx. Thickness - Block 1	Approx. Thickness - Block 2	Approx. Thickness - Block 3	Approx. Thickness - Block 4	Accuracy
P1	PosiTector 6000 FT, FTS, NTS, FNTS, FTRS PosiTector 200 D	375 μm 15 mils	2 mm 80 mils	4.5 mm 185 mils	6.5 mm 250 mils	± (2.5 μm + 0.05% of thickness) ± (0.1 mil + 0.05% of thickness)
P2	PosiTector 6000 FHS, FJS, NHS, EOC	2.5 mm 100 mils	6.5 mm 250 mils	13 mm 500 mils	19 mm 750 mils	± (2.5 μm + 0.05% of thickness) ± (0.1 mil + 0.05% of thickness)
P3	PosiTectAor 100 C	375 μm 15 mils	1.5 mm 60 mils	2.5 mm 100 mils	4.5 mm 185 mils	± (2.5 μm + 0.05% of thickness) ± (0.1 mil + 0.05% of thickness)
P4	PosiTector 100 D	1.5 mm 60 mils	2.5 mm 100 mils	4.5 mm 185 mils	6.5 mm 250 mils	± (2.5 μm + 0.05% of thickness) ± (0.1 mil + 0.05% of thickness)
P5	PosiTector 6000 FKS, NKS	1.5 mm 60 mils	2.5 mm 100 mils	6.5 mm 250 mils	12 mm 480 mils	± (2.5 μm + 0.05% of thickness) ± (0.1 mil + 0.05% of thickness)
P6	PosiTector 200 C	375 μm 15 mils	1.5 mm 60 mils	2.5 mm 100 mils	3 mm 125 mils	± (2.5 μm + 0.05% of thickness) ± (0.1 mil + 0.05% of thickness)
P7	PosiTector 6000 FHXS	1.5 mm 60 mils	4.5 mm 185 mils	6.5 mm 250 mils	9.5 mm 375 mils	± (2.5 μm + 0.05% of thickness) ± (0.1 mil + 0.05% of thickness)
P8	PosiTector 6000 FNGS, FLS	13 mm 500 mils	13 mm 500 mils	13 mm 500 mils	19 mm 750 mils	± (2.5 μm + 0.05% of thickness) ± (0.1 mil + 0.05% of thickness)

All certified standards are supplied with a Certificate of Calibration traceable to NIST or PTB.
P1-P7 Blocks: 38 x 70 mm (1.5'' x 2.75'')   P8 Blocks: 76 x 76 mm (3.0'' x 3.0'')
 

Certified coated metal plates and polystyrene blocks are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements.

Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution.

• Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage
• Ideal for use in the calibration lab, in the field or on the factory floor
• Standards with steel or aluminum substrates consist of 4 plates mounted in a protective binder
• Polystyrene thickness standards consist of 4 blocks supplied in a rugged acrylic storage box
• Individually serialized for traceability to NIST or PTB - includes a Certificate of Calibration
• Certified and labeled in both Metric and Imperial units

Zero Plates available for both Certified Coated Metal Plates and Certified Polystyrene Blocks.