Details

---

Code	Ideal For	Approx. Thickness- Plate 1	Approx. Thickness - Plate 2	Approx. Thickness - Plate 3	Approx. Thickness - Plate 4	Coating/ Substrate	Accuracy
S1	PosiTector 6000 F, FS, FRS, FN, FNS, FNRS, FXS*, FNDS / PosiTest F & FM	0	75 μm 3 mils	250 μm 10 mils	1500 μm 60 mils	Epoxy on Steel (Ferrous)	± 0.43 μm ± 0.017 mil
S2	PosiTector 6000 F0S, F45S, F90S, F90ES / PosiTest DFT Ferrous & Combo	0	75 μm 3 mils	250 μm 10 mils	1000 μm 40 mils	Epoxy on Steel (Ferrous)	± 0.43 μm ± 0.017 mil
S3	PosiTest G & G / PosiPen A, B & C	0	15 μm 0.6 mils	40 μm 1.6 mils	100 μm 4 mils	Epoxy on Steel (Ferrous)	± 0.43 μm ± 0.017 mil
S4	PosiTector 6000 FXS*	0	75 μm 3 mils	1000 μm 40 mils	1900 μm 75 mils	Epoxy on Steel (Ferrous)	± 0.43 μm ± 0.017 mil
A1	PosiTector 6000 N, NS, NRS, FN, FNS, FNRS, FNDS	0	75 μm 3 mils	250 μm 10 mils	1500 μm 60 mils	Epoxy on Aluminum (Non-Ferrous)	± 0.43 μm ± 0.017 mil
A2	PosiTector 6000 NAS, N0S, N45S, N90S / PosiTest DFT Combo	0	75 μm 3 mils	250 μm 10 mils	500 μm 20 mils	Epoxy on Aluminum (Non-Ferrous)	± 0.43 μm ± 0.017 mil
A3	PosiTector 100B, 200, 200B	75 μm 3 mils	125 μm 5 mils	250 μm 10 mils	500 μm 20 mils	Epoxy on Aluminum (Non-Ferrous)	± 0.43 μm ± 0.017 mil

*PosiTector FXS probes with  a range of 0-1500 um (0-60 mils) and Serial Numbers <361485 should use the S1 Standard.
‍All certified standards are supplied with a Certificate of Calibration traceable to NIST or PTB.
Plate Diameter: 38 mm (1.5'') Measurement Diameter: 25 mm (1'')
 

Certified coated metal plates and polystyrene blocks are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements.

Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution.

• Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage
• Ideal for use in the calibration lab, in the field or on the factory floor
• Standards with steel or aluminum substrates consist of 4 plates mounted in a protective binder
• Polystyrene thickness standards consist of 4 blocks supplied in a rugged acrylic storage box
• Individually serialized for traceability to NIST or PTB - includes a Certificate of Calibration
• Certified and labeled in both Metric and Imperial units

Zero Plates available for both Certified Coated Metal Plates and Certified Polystyrene Blocks.